Historický pevný disk Conner CP30087 s rozhranim IDE s kapacitou 120MB.
Model=Conner Peripherals 121MB - CP30104, FwRev=2.77, SerialNo=AB0Y0HK Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=762/8/39, TrkSize=26400, SectSize=660, ECCbytes=7 BuffType=DualPortCache, BuffSize=64kB, MaxMultSect=128, MultSect=off (maybe): CurCHS=0/0/0, CurSects=0, LBA=no IORDY=no PIO modes: pio0 AdvancedPM=no * signifies the current active mode ATA device, with non-removable media Model Number: Conner Peripherals 121MB - CP30104 Serial Number: AB0Y0HK Firmware Revision: 2.77 Standards: Likely used: 1 Configuration: hard sectored not MFM encoded head switch time > 15us fixed drive disk xfer rate > 5Mbs rotational speed tol. Logical max current cylinders 762 0 heads 8 0 sectors/track 39 0 -- bytes/track: 26400 bytes/sector: 660 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 116 MBytes device size with M = 1000*1000: 121 MBytes cache/buffer size = 64 KBytes (type=DualPortCache) Capabilities: IORDY not likely Buffer type: 0003: dual port, multi-sector with read caching ability Buffer size: 64.0kB bytes avail on r/w long: 7 Cannot perform double-word IO R/W multiple sector transfer: Max = 128 Current = ? DMA: not supported PIO: pio0
Disk /dev/sdb: 121 MB, 121724928 bytes 255 heads, 63 sectors/track, 14 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5ed7acb7 Device Boot Start End Blocks Id System /dev/sdb1 1 14 112423+ c W95 FAT32 (LBA)